Introduction of Putty Paste Emulsion
Keywords
Putty paste emulsion, putty emulsion, emulsion for putty paste, active silicon dioxide, nanometer silicon dioxide emulsion
Product Introduction
The putty paste emulsion is made of a nanometer silicon dioxide emulsion modified by high polymers. The active silicon dioxide within it has excellent permeability and can undergo a long-term and continuous "siliconization" reaction with minerals in the wall, combining with the wall body. This product can be mixed and dispersed with heavy calcium carbonate, titanium dioxide, and other pigments to produce water-based putty, which can be used for leveling in new indoor wall decoration, as well as for local repair when old walls are damaged and peeling. It is suitable for concrete, cement mortar, cement pressure board, gypsum board, and other substrates, environmentally friendly, easy to construct, and strong and delicate. 3 tons of emulsion can produce 10 tons of finished putty.
Technical Specifications
Appearance | Slightly yellowish-white paste
Solid content | 16±1%
Density | 1.05±0.02g/ml
Viscosity | 80-85KU
pH (23℃) | 9.0-10.0
Reference Standard:
JG/T 298-2010 "Putty for Indoor Use in Buildings"
Product Features
1. Easy to use, simple operation, good wetting and dispersing performance for inorganic powders, significantly improving production efficiency;
2. Good durability, with inorganic silicate as the adhesive material, characterized by small particle size and strong penetration, it can penetrate into the wall interior and react with the minerals inside to combine into one, resulting in a finished putty that is less likely to have hollowing or delamination;
3. Environmentally friendly, low odor.
Usage and Precautions
1. Mix this product with heavy calcium carbonate (recommended 400 mesh), rutile titanium dioxide, and other pigments and fillers in a ratio of 3:7 to obtain the finished putty;
2. Avoid excessive shear force during dispersion to prevent overheating that may affect product stability, and take cooling measures if necessary;
3. In production, this product should be added to the mixing tank first, and the powder should be added to this product under dispersion to prevent a large amount of powder from adhering to the walls of the tank;
4. The packaging should be used up as soon as possible after opening to avoid skinning or spoilage.
Packaging and Storage
Store in sealed and light-proof conditions, storage temperature 0-35℃;
Shelf life: 12 months under unopened conditions;
Packed in 50kg or 200kg plastic drums, or 1000kg IBC ton containers.
Precautions
This product is non-toxic, but not edible.
No environmental pollution has been found during use, but disposal or discharge should comply with local environmental regulations.
If it comes into contact with the human body and eyes, it should be rinsed with clean water as soon as possible, and medical treatment should be sought promptly if it causes allergic reactions in some individuals.
The packaging of this product should not be discarded carelessly and should comply with local environmental regulations.
